Goldin Metals - Standing Seam Panel

A standing-seam metal roof consists of metal panels running vertically on the roof deck. Each panel has two seams that stand up vertically and are fastened together to seal the joint and keep the elements from penetrating. This design prevents screws from being exposed to the elements which is beneficial for a lower pitched roof, if installed properly.

Goldin Metals, Inc produces Standing Seam panels in 22, 24 and 26 gauge in widths from 12 to 26 inches. Goldin Metals, Inc have panels available in nail strip, snap seam, and mechanical lock. Goldin Choice also features rib hieghts of 1", 1 1/2", and 1 3/4".

Standing Seam
How to Install Standing Seam
Wind Load Chart
Due to style, fastener type, and panel width all effecting the wind rating. Please download the following pdf's for the wind load charts.

1in Nail Strip Florida Product Approval


1.5in Nail Strip Florida Product Approval


1in Snap Lock Florida Product Approval


1.5in Snap Lock Florida Product Approval

           Metal Roofing          
Home Contact Us Photo Gallery